Navigation

Whaka

Weight 14.1kg
Sizes  16", 18", 20"
Frame Aluminium 7005 TB
Color(s) Turquoise

Pricing

recomm. retail price
2 699.00 €

All mountain Fully with 100% fun potential .

STEVENS' engineers have finely tuned the Whaka for trail and touring use down to the smallest detail: The alloy four-link frame scores with short chainstays for agile handling, low stand-over height and smart component integration. Fox Float Performance suspension with 150mm travel and superior specs – from complete Shimano XT Shadow Plus derailleur to DT Swiss wheels with extra wide axle spacing to the Spunk cockpit plus KindShock's dropper seatpost.

  • 150 mm touring full-suspension bike w/ Fox Float chassis
  • Reliable Shimano Deore XT/SLX/Deore double chainring drivetrain
  • Strong Shimano Deore disc brakes (203/180 mm)
  • Spank cockpit plus Kind Shock CRUXi seat post (125 mm)
  • Agile 27.5" wheels plus Schwalbe Nobby Nic tires suitable for riding trails

Technology

Rear shock Development

Specific suspension set-up for maximum performance in any type of bike.

continue reading …

Absenkbare Sattelstütze (Dropper Post)

Optimale Sitzhöhe für Antriebs-Effizienz. Knopfdruck. Sattel runter für technische Abfahrten.

Weiterlesen …

Boost-Standard fork

What is right for the rear wheel is even more important at the front wheel - because steering precision matters.

continue reading …

Boost-Standard am Hinterbau

Seit dem Modelljahr 2016 entsprechen die Hinterbauten aller STEVENS-Fullys dem neuen „Boost“.

Weiterlesen …

Chain guide interface

To prevent the light aluminium tubes of STEVENS fullies we use high-quality bolt-on protectors.

continue reading …

Side Swing Umwerfer

Blitzschnelle, leichtgängige Gangwechsel dank innovativer Mechanik von Shimano.

Weiterlesen …

Hydroforming

A bonus in steering precision and longevity.

continue reading …

Versatile cable routing

To ride your bike like you want to: Versatile cable routing.

continue reading …

Tapered Steerer

Tapered Steerer / Tapered Headtube (MTB)

Riders benefit from noticeably higher steering precision, almost without weight penalty.

continue reading …

Triple Butted, Double Butted

For light and stable frame: Frame tubes with thinner walls in the middle and thicker walls at the ends.

continue reading …

QR15-Steckachse vorn

Die funktionellste Methode, das Vorderrad in der (Feder-)Gabel zu verankern.

Weiterlesen …

E-thru Rear Axle

Thru-axle standard from Shimano for mountain bike rear triangles.

continue reading …

Smooth Welded

Smooth welds reduce notching and make aluminium frames more durable.

continue reading …

Kettenstreben-Protektor

Gegen heftige Kettenschläge werden die Kettenstreben der STEVENS-Carbon-Fullies geschützt.

Weiterlesen …

Di2-ready

Vorbereitete Rahmen für elegante Integration von elektronischer Schaltung.

Weiterlesen …

Rearshock Development

Diffferent purposes in different terrain require different ride properties. This is why every fully rear triangle receives a specific setup from STEVENS' engineers to meet the respective bike's requirement for optimum performance. Firm for minimum power loss in the marathon with lots of comfort for long distance riding with a linear characteristic curve and mind-soothing reserves for hard hits.

Absenkbare Sattelstütze (Dropper Post)

Optimale Sitzhöhe für Antriebs-Effizienz. Knopfdruck. Sattel runter für technische Abfahrten. Knopf… so könnte es endlos weitergehen – und auf manchen technischen Trails wird die Sattelstützen-Fernbedienung häufiger bedient als der Umwerfer-Schalthebel. Experten für Fahrspaß und Fahrsicherheit sind sich einig: selten hat eine Innovation so überzeugende Vorteile und so wenige Nachteile (Gewicht, Preis) mit sich gebracht, wie die Sattelstützen mit stufenlos einstellbarer Sitzhöhe.

Boost-Standard Fork

What is right for the rear wheel is even more important at the front wheel - because steering precision matters. This is why STEVENS uses suspension forks and hubs with extra wide axle spacing for all its 29er fullies, the Whaka+ ES and the trail rocket Sonora SL. These 110mm of axle spacing are called "Boost" or "Plus" and stand for lots of added lateral stiffness plus space for extra wide studded tires.

Boost-Standard am Hinterbau

Seit dem Modelljahr 2016 entsprechen die Hinterbauten aller STEVENS-Fullys dem neuen „Boost“- oder „Plus“-Achsmaß mit 148 mm Einbaubreite – und das hat gute Gründe: Die Seitensteifigkeit des Hinterrades erhöht sich um ca. 20%, wovon vor allem die großen 29er-Laufräder profitieren. Und es wird Platz geschaffen für voluminöse Stollenreifen, die auf dem Trail mit besserer Performance und mehr Fahrspaß punkten.

Chain guide interface

To prevent the light aluminium chainstays of STEVENS fullies from scratching, we use high-quality bolt-on protectors. They also house a little, smart chain guide directly underneath - the Bionicon c.guide eco (available at your local bike dealer). The c.guide also provides a quiter drivetrain and keeps the chain securely on the chainrings.

Side Swing front derailleur

Side Swing Umwerfer
Side Swing front derailleur

Our top supplier Shimano made a great innovation here. One that works reliably on any terrain when changing gears at the front has to be fast and precise - be it in competitions or on technical trails. Thanks to its upright axes the front derailleur cage swings outward and forward at the same time, and due to its direct actuation from the downtube only needs minimum operating force.

Hydroforming

Using water or oil pressure aluminium tubes are transformed from their original round shape into their ideal shape determined by STEVENS engineers to perfectly withstand any load without any weight penalty. This means better steering precision on the trail and higher longevity.

Versatile cable routing

We keep the cable routing on our bikes as versatile as possible so you can ride your bike like you want to. There are wide and therefore easy to reach cable ports in the frame to insert either one or two cables or none at all - there are cover plugs for any of these configurations. This is also very convenient for retrofitting a dropper post.

Tapered Steerer / Tapered Headtube

Fork shaft (or steerer tube) and head tube are tapered, meaning their diameter increases from top to bottom resulting in a conical shape. The diameter needs to be bigger at the bottom since this is where higher stress is applied - especially when the bike has a higher total weight due to luggage or an e-drive and battery. Also tapered steerers feature a smoother force transfer (like forces caused by hard braking) to the downtube than forks with a continuous 1 1/8" diameter.

Triple Butted, Double Butted

Meaning a frame tube has three or two different wall thicknesses along its length. Triple butted (TB) is the usual technology with STEVENS high-quality frames.
Tubes with different wall thicknesses are optimally adjusted to certain ways of manufacturing or to withstand specific loads. Where the highest loads occur or where tubes are welded, walls are the thickest. Butted tubes allow frame weight to be lower by several hundred grams.

QR15-Steckachse vorn

Die „15“ steht für den Achsdurchmesser, das „QR“ für „Quick Release“, also Schnellspanner – und zusammen für die funktionellste Methode, das Vorderrad in der (Feder-)Gabel zu verankern. Die Vorteile sind bestechend: hohe Steifigkeit, präzise Bremsscheiben-Positionierung und kinderleichte Bedienung. Also stattet STEVENS fast alle Mountainbikes und sogar die hochwertigsten Trekking-, Crossbikes und Pedelecs damit aus. Vor allem bei den 29“-MTBs wird sogar noch die Einbaubreite erhöht – von 100 auf 110 mm, das ist noch steifer.

E-thru Rear Axle

This abbreviation stands for Shimano's thru-axle standard for MTB rear stays that integrates a thread into the dropout. On the majority of STEVENS mountain bikes a 12mm thru axle provides outstanding rear triangle stiffness and utmost precision in brake disc alignement to prevent annoying brake rub.

Smooth Welded

Additional step in welding. The first, rippled weld, typical for aluminium, is covered with a second smoother weld. This not only improves looks but also lowers the risk of notches in this spot, which makes the frames more durable.

Kettenstreben-Protektor

Damit Ihr bedenkenlos jede Piste herunterjagen könnt: Der speziell angepasste Protektor schützt die Kettenstreben der STEVENS Carbon-Fullys vor heftigen Kettenschlägen.

Di2-ready

Elektronische Schaltungen haben sich am Rennrad und am Mountainbike neben den klassischen mechanischen Schaltungen längst etabliert. Bestechend schnelle und zuverlässige Gangwechsel bei minimalem Wartungsaufwand machen sich eben nicht nur bei der Tour de France oder im Cyclocross-Worldcup oder auf den Cross Country-Weltcup-Strecken bezahlt. Und genau darum sind viele Rennrad- und Mountainbikerahmen von STEVENS bereits „Di2-ready“ – sprich: für die nahtlose Integration von Akkus und Kabeln (anstelle der herkömmlichen Seilzüge) vorbereitet. Und selbst für seine edle Alfine-Nabenschaltung bietet Shimano eine Elektronik-Version an.

Equipment

  • einfach
  • erweitert

Chassis

Frame
Aluminium 7005 TB
  • Axle: QR12x148
  • Brake: postmount disc 7"
  • BB: Pressfit 92
  • Front derailleur mount: Direct mount (high)
  • Cable routing: internal
Front fork
Fox 34 Float Rhythm
  • Travel: 150mm
  • Air suspension
  • Tapered Steerer 1 1/8" - 1 1/2"
  • Axle: QR15x110
  • Brake: postmount disc 6"
Headset
STEVENS MTB Taper 1 1/8" - 1 1/2"
  • Upper bearing cup: ZS44/28.6
  • Lower bearing cup: ZS55/40
Shock absorber
Fox Float DPS Performance
  • Travel: 150mm
  • Air suspension
  • Length: 200mm
  • Shock travel: 57mm
  • Mounting width: 22.2x8mm
Brakes
Shimano Deore
  • BR-M615
  • Hydraulic disc brake
  • Rotor: SM-RT66
  • Rotor size: 203/203mm
  • IS / 6-Bolt

Drivetrain

Crankset
Shimano SLX
  • FC-M7000-B, 36-26 T
  • BB type: Pressfit 92 / Hollowtech II
  • Boost chain line
Derailleur f
Shimano SLX
  • FD-M7020-D6
  • Side-Swing
Chain
Shimano CN-HG601
Derailleur r
Shimano Deore XT Shadow+
  • RD-M8000-DGS
  • 11-speed
  • Direct Mount
  • Total capacity: 39 T
Cassette
Shimano SLX
  • CS-M7000
  • 11-speed
  • Combination: 11-12-15-17-19-21-24-28-32-37-42 T
Gear ratio
Zoom 1.37 - 7.23 m, 2*11

Wheelset

System wheelset
DT Swiss Mountain Classic
Tires
Schwalbe Nobby Nic Evolution
  • Tire size: 60-584
  • Foldable
  • Front: TrailStar compound
  • Rear: PaceStar compound
  • Snake-Skin
  • Tubeless Easy

Cockpit

Handlebar
Spank Oozy Trail
  • Width: 760mm
  • Backsweep: 6°
  • Rise: 15mm
  • Clamp: 31.8mm
Stem
Spank Oozy Trail
  • Handlebar clamp: 31.8mm
  • Angle: 0°
Saddle
Oxygen Roccia
Seatpost
Kind Shock CRUXi
  • Travel: 125mm
  • Remote Lockout
  • Length: 467mm
  • Diameter: 30.9mm
Shiftlever
Shimano SLX
  • SL-M7000
Brakelever
Shimano Deore
  • BL-M615
  • 2 finger

Data

Weight
14.1kg
Sizes
16", 18", 20"
Color(s)
Turquoise
Laden weight
115kg
  • Bike incl. rider, clothing and luggage
 

Test Reports

Logo Preis-Leistungs-Tipp

Preis-Leistungs-Tipp

05/2016

Let's dance! Downhill the Whaka cuts a mean rug, its great handling and chassis are an absolute delight. A very attractive offer.

Geometry

schematische Skizze eines Fahrrades mit eingezeichneten Geometrie-Messpunkten

Frame height (") 16 18 20 Measuring mode
Seattube length A1 615 625 646 nominal
Seattube length A2 420 450 480 bottom bracket to top of seattube
Seattube length A3 335 336 334 bottom bracket to top of top tube
Top tube length B 530 549 569  
Top tube horizontal C 565 585 605 center headtube to center seatpost/seattube
Headtube angle (°) D 67 67 67  
Seattube angle (°) E 75 74.6 74.3 effective, to top of HT
Wheelbase F 1139 1159 1180  
Chainstay length G 430 430 430  
Headtube length H 110 120 140  
Bottom bracket drop I 16 16 16 distance of bottom bracket to hub level
Bottom bracket height K 337 337 337 distance to ground
Fork rake L 44 44 44  
Slope M 259 268 287 top tube level distance front to rear
Wheel radius N 353 353 353 incl. tires
Standover height O 747 750 754 top of top tube to ground*
Fork build height P 534 534 534 incl. lower headset cups
Front wheel - bottom bracket Q 709 730 750  
Reach R 417 433 445 center bottom bracket to center headtube, horizontal
Stack S 594 603 621 center bottom bracket to center headtube, vertical
Stack/Reach (1:x)   1.42 1.39 1.4 ratio stack to reach
Seatpost diameter   30.9 30.9 30.9  
Stem length   50 50 65 center-center
Stem angle (°)   0 0 0  
Handlebar diameter   31.8 31.8 31.8  
Assembled spacers   7.3 + 10 + 5 + 5 + 5  
Handlebar width   760 760 760  
Cranklength   170 175 175  
    16 18 20  

* measured 1/3 from seattube and 2/3 from headtube

// NEVER STOP