E-Sledge

Gewicht 22,7 kg
Maten  27,5" - 16", 18", 20", 22"
Frame Aluminium 7005 TB
Kleur(en) Carrara White

Prijzen

Adviesprijs
1 736 000,00 Ft

Meer fietsplezier.

De combinatie van een enduro chassis en elektromotor is simpelweg indrukwekkend - ten minste als de Fox-vering, het 11-speed Shimano-versnellingssysteem, de banden met groot volume en extra tractie en de krachtige schijfremmen de 70 Nm van de elektrische aandrijving van Shimano Steps de baas kunnen. Wedden dat u niet meer terug wilt naar een fiets zonder trapondersteuning?

  • Enduro e-fully met triple butted aluminiumframe en perfect geïntegreerd Shimano Steps-systeem
  • Fox 36 Float Performance E-bike+-vork en Float DPS Performance E-bike-achterdemper
  • Nieuwe Shimano Deore XT/SLX 1x12 versnellingen
  • Shimano BR-MT520-schijfremmen met 4 zuigers (203 mm!)
  • Schwalbe Eddy Current-banden en dropper-zadelpen

Technologie

Boost-Standard fork

What is right for the rear wheel is even more important at the front wheel - because steering precision matters.

continue reading …

Boost Rear Axle Spacing

Boost Rear Axle Spacing

Since model year 2016 the axle spacing in the rear stays of all STEVENS fullies adhere to the new "Boost" standard.

continue reading …

Rear shock Development

Specific suspension set-up for maximum performance in any type of bike.

continue reading …

Dropper Post

Dropper Post

Optimum seating level for best drivetrain efficiency. Push the button: saddle down for best clearance on technical descents.

continue reading …

500 Wh Battery

500 Wh Battery

STEVENS uses batteries with a huge 500 Watt-hour capacity in all its top-notch pedelecs for up to 215 km of range.

continue reading …

Hydroforming

A bonus in steering precision and longevity.

continue reading …

4-piston disc brakes

The most demanding riders are satisfied with nothing less in terms of braking performance and riding safety.

continue reading …

Tapered Steerer

Tapered Steerer / Tapered Headtube

Riders benefit from noticeably higher steering precision, almost without weight penalty.

continue reading …

Abus YourPlus™

One key, any number of locks - for battery and frame lock as well as additional locks for connecting the valuable e-bike.

continue reading …

Triple Butted, Double Butted

For light and stable frame: Frame tubes with thinner walls in the middle and thicker walls at the ends.

continue reading …

Speed sensor integrated in the dropout

Rear left, well hidden …

continue reading …

QR15 Front Thru-Axle

QR15 Front Thru-Axle

The most useful method to fix the front wheel to the (suspension) fork.

continue reading …

E-thru Rear Axle

Thru-axle standard from Shimano for extra stiff rear triangles and precision in brake disc alignement.

continue reading …

Smooth Welded

Smooth welds reduce notching and make aluminium frames more durable.

continue reading …

Versatile cable routing

To ride your bike like you want to: Versatile cable routing.

continue reading …

Chain Stay Protector

Chain Stay Protector

To protect the chain stays of STEVENS carbon fullies from a slapping chain.

continue reading …

Boost-Standard Fork

What is right for the rear wheel is even more important at the front wheel - because steering precision matters. This is why STEVENS uses suspension forks and hubs with extra wide axle spacing for this bike. These 110mm of axle spacing are called "Boost" or "Plus" and stand for lots of added lateral stiffness plus space for extra wide studded tires.

Boost Rear Axle Spacing

This bike adheres to the "Boost" standard with 148 mm axle spacing. And there are good reasons for that. Rear wheel stiffness increases by 20 % which is especially beneficial in large 29" wheels. And there is more space for voluminous studded tires to give you more control and fun an the trail.

Rearshock Development

Diffferent purposes in different terrain require different ride properties. This is why every fully rear triangle receives a specific setup from STEVENS' engineers to meet the respective bike's requirement for optimum performance. Firm for minimum power loss in the marathon with lots of comfort for long distance riding with a linear characteristic curve and mind-soothing reserves for hard hits.

Dropper Post

Optimum seating level for best drivetrain efficiency. Push the button: saddle down for best clearance on technical descents. Push the button: saddle up … this could go on forever - and on some technical trails the dropper post remote will be actuated more often than the front derailleur shift lever. Experts for fun and safety alike agree: Very rarely has an innovation meant so many convincing advantages and so little disadvantages like a dropper post with infinitely adjustable seat height.

500 Wh Battery

This will decide success or failure of e-mobility. That's why STEVENS uses batteries with a huge 500 Watt-hour capacity in all its top-notch pedelecs for up to 215 km of range (according to the manufacturer, please refer to the Bosch range calculator for more exact results). This is possible even without a weight penalty: Compared to the old PowerPack 400, the new Bosch PowerPack 500 is just 100 grams heavier. This huge "fuel tank" is our premier recommendation for pedelec riders who don't shy away from the hilliest of itineraries.

Hydroforming

Using water pressure aluminium tubes are transformed from their original round shape into their ideal shape determined by STEVENS engineers and designers.

4-piston disc brakes

4-piston disc brakes

The demanding riders of high-end MTBs and touring e-bikes - with or without "E" support - are satisfied with nothing less than the most powerful hydraulic disc brakes in terms of braking performance and riding safety. They have 4 pistons per caliper instead of 2, and their larger brake pads can withstand much more heat, making them almost immune to fading (less friction due to heating).

Tapered Steerer / Tapered Headtube

Fork shaft (or steerer tube) and head tube are tapered, meaning their diameter increases from top to bottom resulting in a conical shape. The diameter needs to be bigger at the bottom since this is where higher stress is applied - especially when the bike has a higher total weight due to luggage or an e-drive and battery. Also tapered steerers feature a smoother force transfer (like forces caused by hard braking) to the downtube than forks with a continuous 1 1/8" diameter.

Abus YourPlus™

Abus YourPlus™

One key, any number of locks - the Abus "YourPlus™" program makes it possible to get keyed-alike locks with Plus lock cylinder. This is practical especially with e-bikes, as there are several locks on the bike: on the battery, as a frame lock and optionally an additional lock for connecting the bike to a fence or the like. Thanks to Abus YourPlus™ they can all be operated with a single key.

Triple Butted, Double Butted

Meaning a frame tube has three or two different wall thicknesses along its length. Triple butted (TB) is the usual technology with STEVENS high-quality frames.
Tubes with different wall thicknesses are optimally adjusted to certain ways of manufacturing or to withstand specific loads. Where the highest loads occur or where tubes are welded, walls are the thickest. Butted tubes allow frame weight to be lower by several hundred grams.

Speed sensor integrated in the dropout

Speed sensor integrated in the dropout

This view is only available when the rear wheel is removed - otherwise the sensor, which gives the e-bike drive system the decisive information about the current speed, is perfectly integrated and well protected in the rear left dropout. The not so rare error that the incorrectly positioned spoke magnet slows down the motor support is thus combated very effectively.

QR15 Front Thru-Axle

"15" stands for the diameter in millimeters, "QR" for quick release. Combined they are the most useful method to fix the front wheel to the (suspension) fork. With convincing advantages: high stiffness, precise positioning of the brake disc and super-easy handling. So STEVENS specs almost all its mountain bikes and even high-quality trekking bikes, cross bikes and pedelecs with a thru-axle. Additionally, especially with 29" MTBs axle spacing is increased from 100 to 110 mm which makes the design even stiffer.

E-thru Rear Axle

E-thru Rear Axle at E-Cayolle

This abbreviation stands for Shimano's thru-axle standard for rear stays that integrates a thread into the dropout. As a result, the 12mm thru axle provides outstanding rear triangle stiffness and utmost precision in brake disc alignement to prevent annoying brake rub.

Smooth Welded

Additional step in welding. The first, rippled weld, typical for aluminium, is covered with a second smoother weld. This not only improves looks but also lowers the risk of notches in this spot, which makes the frames more durable.

Versatile cable routing

We keep the cable routing on our bikes as versatile as possible so you can ride your bike like you want to. There are wide and therefore easy to reach cable ports in the frame to insert shift or brake sleeves, Di2 cables or even no sleeves at all - there are the appropriate cover plugs for all of this.

Chain Stay Protector

Now you can tackle any downhill ramp without worry: The specially fitted chain stay protector prevents the chain stays of STEVENS carbon fullies from getting damaged by a slapping chain.

Uitrusting

Details

Chassis

Frame
Aluminium 7005 TB
  • O.L.D.: 148 mm
  • Brake: postmount disc 7"
  • BB: Shimano Steps
  • Cable routing: internal
Voorvork
Fox 36 Float Performance E-Bike+
  • Travel: 160 mm
  • Air suspension
  • Tapered Steerer 1 1/8" - 1 1/2"
  • O.L.D.: 110 mm
  • Brake: postmount disc 7"
Balhoofd
STEVENS MTB Taper 1 1/8"-1 1/2"
  • Upper bearing cup: ZS44/28.6
  • Lower bearing cup: ZS55/40
Schokdemper
Fox Float DPS Performance E-Bike
  • Travel: 150 mm
  • Air suspension
  • Length: 185 mm
  • Shock travel: 55 mm
  • Mounting width: Trunnion Mount/22.2x8 mm
Remmen
Shimano BR-MT520
  • Hydraulic disc brake
  • 4 pistons
  • Rotor: SM-RT64
  • Rotor size: 203/203 mm
  • Center-Lock

Aandrijflijn

Crankstel
Shimano Steps E8000
  • FC-E8000
  • BB type: Shimano Steps
  • Boost chain line
Cassette
Shimano Steps E8000
  • SM-CRE80-12-B
  • 38 T
  • Narrow Wide
  • Boost chain line
Achterderailleur
Shimano Deore XT Shadow+
  • RD-M8100-SGS
  • 12-speed
  • Total capacity: 41 T
Ketting
Shimano CN-M7100
Cassette
Shimano SLX
  • CS-M7100
  • 12-speed
  • Combination: 10-12-14-16-18-21-24-28-33-39-45-51 T
Pedalen
MTB Alu Flatpedal Reflex
Verzet
Zoom 1.67 - 8.51 m, 1*12

E-System

Motor
Shimano Steps E8000
  • Continuous rated power: 250 W
  • Max. torque: 70 nm
Accu
Shimano Steps BT-E8010
  • Capacity: 504 Wh/14 Ah
  • Voltage: 36 V
  • Technology: Li-Ion
Begrensd op
25 km/u (15,5 mph)
Actieradius
shimano-steps.com
Aantal standen
3 aandrijvingsstanden met ondersteuningsniveaus van 50 tot 300% plus loophulp

Wielen

Naven
Shimano SLX
  • Axle: QR15x110/12x148 mm
Velgen
Sun Ringlé Düroc TR35
  • ETRTO: 31 x 584
Banden
Schwalbe Eddy Current Evolution
  • Tire size: 65-584
  • Foldable
  • Addix Soft compound
  • Tubeless Easy

Cockpit

Stuur
Oxygen E-Scorpo
  • Width: 760 mm
  • Backsweep: 9°
  • Rise: 25 mm
  • Clamp: 31.8 mm
Stuurpen
Oxygen E-Scorpo
  • Handlebar clamp: 31.8 mm
  • Angle: 6°
Zadel
Oxygen Roccia
Zadelpen
Kind Shock LEV-SI
  • Travel: 100 mm | 125 mm | 150 mm
  • Remote Lockout
  • Length: 350 mm | 400 mm | 450 mm
  • Diameter: 30.9 mm
  • Insertion depth: min. 90 mm (100) | 100 mm (125 + 150)
Versnellingshendel
Shimano SLX
  • SL-M7100
  • 12-speed
Remhendel
Shimano BL-MT501
  • 2 finger
Display
Shimano Steps E7000
  • SC-E7000-B

Gegevens

Gewicht
22,7 kg
Maten
27,5" - 16", 18", 20", 22"
Kleur(en)
Carrara White
Toegest. totaalgewicht
140 kg
  • Bike incl. rider, clothing and luggage

Testrapporten

Logo Die Wahl der Redaktion

Die Wahl der Redaktion

04/2017

The E-Sledge+ is STEVENS' solid E-MTB offer for when the going gets tough. It's a great all-round package with great ride characteristics and fun to ride even in rough terrain.

Geometrie

schematische Skizze eines Fahrrades mit eingezeichneten Geometrie-Messpunkten

Framemaat (") 16 18 20 22 Meetmethode
Zitbuislengte A1 624 633 643 652 Nominaal
Zitbuislengte A2 400 430 460 490 Hart trapas tot bovenkant zitbuis
Zitbuislengte A3 372 398 418 444 Hart trapas tot bovenkant bovenbuis
Bovenbuislengte B 554 574 595 612  
Bovenbuis horizontaal C 577 600 622 640 Tot snijpunt zadelpen
Hoek van de balhoofdbuis (°) D 65,5 65,5 65,5 65,5  
Zitbuishoek (°) E 75 75 75 75  
Wielbasis F 1174 1196 1219 1239  
Lengte van de liggende achtervork G 436 436 436 436  
Lengte van de balhoofdbuis H 95 100 110 120  
Trapasverlaging I 19 19 19 19 Afstand tot naafhoogte*
Trapashoogte K 342 342 342 342 Afstand tot grond*
Vorksprong L 51 51 51 51  
Sloping M 224 204 193 177 Hoogteverschil bovenbuis voor/achter
Wieldiameter N 361 361 361 361 Incl. banden
Standoverhoogte O 726 741 751 763 Bovenkant bovenbuis tot grond**
Inbouwhoogte van de voorvork P 572 572 572 572 Incl. de onderste balhoofdcup*
Afstand voorwiel tot trapas Q 739 761 785 804,6  
Reach R 414 433 454 469 Horizontaal van trapas tot balhoofdbuis
Stack S 602 611 620 629 Verticaal van trapas tot balhoofdbuis
Stack/reach (1:x)   1,45 1,41 1,37 1,34 Verhouding stack tot reach
Diameter van de zadelpen   30,9 30,9 30,9 30,9  
Stuurpenlengte   50 50 50 60 Hart op hart
Stuurpenhoek (°)   6 6 6 6  
Stuurklem   31,8 31,8 31,8 31,8  
Gemonteerde spacers   5 + 5 + 5 + 5 + 5  
Stuurbreedte   760 760 760 760  
Cranklengte   170 170 170 170  
    16 18 20 22  

* Incl. berijder en met iets ingeveerde verende voorvork (standaard fietshouding)

** 1/3 van de zitbuis verwijderd, voorvork en achterdemper niet ingeveerd

// NEVER STOP