Selected Shimano brakes are available with 160/160 millimetre or 160/140 millimetre rotors. 160-millimetre front and rear brake rotors offer higher braking power and more safety reserves. 160/140 millimetre rotors save some weight, but are only recommended for lighter riders and mainly riding in the flat. SRAM brakes use 160/160 millimetre rotors without exception.
","ccat_infoimagepath":null},{"ccat_id":"2","ccat_name":"cranksets","ccat_title_i18n":"Cranksets","ccat_infotext_i18n":"The choice of the right crank depends strongly on your own ambitions and riding profile. Shimano compact cranks with 50/34 teeth have lighter gears especially for hilly and mountainous regions. Semi-Compact cranks (52/36 teeth) offer reserves for fast rides on the flat. SRAM 12-speed drivetrains are available with a universal 48/35-tooth chainring combination. In combination with 10-tooth cassettes, they offer a wider gear range than traditional semi-compact drivetrains.
","ccat_infoimagepath":null},{"ccat_id":"3","ccat_name":"cassettes","ccat_title_i18n":"Cassettes","ccat_infotext_i18n":"Depending on the component group, the STEVENS Custom Bikes Configurator offers a selection of different cassettes. They allow you to fine-tune the gear range to your specific needs. Cassettes with a large gear range are particularly suitable for use in hilly and mountainous terrain because of their \"light\" gears. Cassettes with a smaller range convince with small jumps between the individual gears.
","ccat_infoimagepath":null},{"ccat_id":"4","ccat_name":"wheelsets","ccat_title_i18n":"Wheelsets","ccat_infotext_i18n":"The STEVENS Custom Bikes Configurator offers a wide range of different wheel sets. They can be used for a wide range of applications. You can choose from aluminium and carbon wheels for daily use, endurance training rides or demanding racing. Since the jaw widths of the different wheel sets differ in width, the tyres have different widths. In general, the wider the tyre, the more comfortable it is to ride on uneven surfaces and the lower the rolling resistance.
","ccat_infoimagepath":null},{"ccat_id":"5","ccat_name":"tires","ccat_title_i18n":"Tires","ccat_infotext_i18n":"Whether with tube or tubeless. In 25, 28, 30 or 32 millimetres width. As a mile-eater or for the highest performance. The STEVENS Custom Bikes Configurator offers the ideal tyre to match your bike and wheelset.
","ccat_infoimagepath":null},{"ccat_id":"6","ccat_name":"tubes","ccat_title_i18n":"Tubes","ccat_infotext_i18n":"You have the choice for the wheels of your custom set-up: whether it's rubber tubing that has been tried and tested millions of times, extra-light polyurethane or puncture-proof tubeless set-up. The STEVENS Custom Bikes Configurator offers the right setup for every requirement.
","ccat_infoimagepath":null},{"ccat_id":"7","ccat_name":"handlebars","ccat_title_i18n":"Handlebars","ccat_infotext_i18n":"Next to the frame height, the cockpit, consisting of handlebars and stem, has the greatest influence on the riding posture. The STEVENS Custom Bikes Configurator therefore offers a wide range of handlebars with different geometries. In aluminium or carbon as well as a combined handlebar-stem unit for maximum aerodynamics.
\nWhen selecting the right handlebar width, please note: The widths in the Custom Bikes Configurator are given \"centre-to-centre\". Deda, on the other hand, measures the handlebar width \"outside-outside\". Handlebars with a width of 40 centimetres measured \"centre-to-centre\" are described by Deda as 42 centimetres. Measured 42-centimetre handlebars as 44 centimetres, etc.
","ccat_infoimagepath":null},{"ccat_id":"8","ccat_name":"stems","ccat_title_i18n":"Stems","ccat_infotext_i18n":"Stems are available in different lengths and for full or semi integration of the cables to match the handlebars and desired seating position. The stem length of the handlebar-stem units is also selected in this section.
","ccat_infoimagepath":null},{"ccat_id":"9","ccat_name":"forkshaft","ccat_title_i18n":"Forkshaft","ccat_infotext_i18n":"The number of spacers influences the height of the stem. A low spacer height provides a sportier riding position, more spacers result in a more upright, comfortable riding position.
\nAs the number of spacers increases, the length of the steerer tube increases, which also raises the overall weight of the fork.
","ccat_infoimagepath":null},{"ccat_id":"10","ccat_name":"saddles","ccat_title_i18n":"Saddles","ccat_infotext_i18n":"The saddle is one of the main points of contact with the bike and is responsible for comfort on long tours. Whether a classic saddle with a long nose and relief channel or a short version with an ergonomic cut-out. The saddles available in the STEVENS Custom Bikes configurator cover a wide range of designs and seating positions.
","ccat_infoimagepath":null},{"ccat_id":"11","ccat_name":"seatposts","ccat_title_i18n":"Seatposts","ccat_infotext_i18n":"The shape of the seat post determines the riding position within certain limits. Seatposts without offset/offset to the rear allow a forward-shifted sitting posture. Seatposts with offset shift the seat posture to the rear and allow adaptation to special ergonomic requirements.
","ccat_infoimagepath":null},{"ccat_id":"12","ccat_name":"optionalparts","ccat_title_i18n":"Optionalparts","ccat_infotext_i18n":"Optional accessories such as adjusters for the shift cables on mechanical shifters or satellite shifters for the Shimano Di2 radio shifter complete the custom set-up on request.
","ccat_infoimagepath":null},{"ccat_id":"13","ccat_name":"tapes","ccat_title_i18n":"Tapes","ccat_infotext_i18n":"Handlebar tapes in different colours and surface textures allow you to customise the cockpit. The thickness of the handlebar tape can also be used to adjust the riding comfort and feedback of the front wheel.
","ccat_infoimagepath":null},{"ccat_id":"14","ccat_name":"coloredcables","ccat_title_i18n":"Coloredcables","ccat_infotext_i18n":null,"ccat_infoimagepath":null},{"ccat_id":"15","ccat_name":"bottlemounts","ccat_title_i18n":"Bottlemounts","ccat_infotext_i18n":"Bottle cages in different materials, shapes and colours complete the custom set-up.
","ccat_infoimagepath":null},{"ccat_id":"16","ccat_name":"cableadjusters","ccat_title_i18n":"Cableadjusters","ccat_infotext_i18n":null,"ccat_infoimagepath":null}],"currency":"€","referer":""}